Home Machines FRAMA 5600
Print E-mail

FRAMA 5600

alt
FRAMA 5600
 

 
 Target Use  Multi-Storey (+extra tool options available)
 Walls  
 Floors  
 Trusses  
   
 Material Range  1.2mm - 1.6mm (18-16 gauge)
 Product Size  75mm - 150mm (3" - 6")
 Production Rate  300 - 700m/hour (990-2300 feet/hour)
 Control  Touch Screen with Windows XP
 Printer  Dual Head Inkjet
 Punch Tools  Nine - Standard
 Length  3470mm (11'4")
 Width  780mm (2'7")
 Height  1380mm (4'6")
 Weight  2100kg (4630lb)
 Electrical Req.  400 - 460V 50 - 60Hz
 Motor Power  7.5kW (10hp)
 Hydraulic Power  4.0kW (5.5hp)
 Hydraulic Tank  40 litres (10.5 gal)
 Covers  Fully Guarded with Emergency Stop Buttons
  
 

The FRAMA 5600 produces framing from steel coil up to 1.6mm thick.

The combination of specific punch tools gives this multi-purpose machine the ability to produce Studs, Tracks and Trusses directly from software instructions without any machine adjustments.

All Hardware is CE and UL compliant and tested to comply with current CE emissions standards.

Standard Tool Operations

 
Image
Web Notch - Punches away the web to allow through intersections
 
Image
Service Hole - Up to Ø38mm wiring or plumbing hole.
 
Image
Lip Notch - Punches away the lip to allow T or through intersections
 
Image
Dimple - Punched hole for screw and recess for screw head
 
Image
Swage - Crimps the product undersize to allow through intersections
 
Image
Crimp Cut Off - Cuts the product to length and crimps the end to allow a load bearing connection
End Chamfer - Notches the end for angled bracing
Plumbing Service Hole - Large punched hole for waste pipes
 
Image
Web Holes - For Extra Fixing

 

Image
Inkjet Printed Component Information

 

ExtraTools.

Option 1- Customer defined prepunch tool

Option 2 - Customer defined postpunch tool

The H560 is a larger Howick Frame Machine so it has space for two extra hydraulic tools, commonly these are specified for extra fixing hole punches such as bolt down holes or for floor structure attachment positions. For machines that require more than two extra tools, or larger tools are required, "Howick" will design and manufacture a specialised machine to suit.

End Bearing. 

This machine is unique with the ability to produce True-Load Bearing Studs from the use of a special cut-off tool that crimps the end of the studs to locate into the bottom of the track section. Customers using this machine are able to build and engineer multi-storey buildings of up to 10 floors as the fastenings do not carry the compression loads.

 
  orange-bullet   Howick 中国网站
  orange-bullet Site Français
  orange-bullet Русская версия
  orange-bullet Videos
  orange-bullet Newsletter
 Howick Brochure        
  orange-bullet  Download PDFbrochure
 Next Trade Shows        


Come and see us at
the Next Trade Show

Details to be advised

 





video

videotext

See More Howick Videos Here:

© 2013 Howick Ltd. | Eco Statement | Links | Sitemap | Webmail | Subscribe to Newsletter | Privacy Policy | Payments | Careers