|
H520 Frame Machine
H520 Frame Machine
|
| Target Use |
|
|---|
| Walls |
 |
|---|
| Floors |
 |
|---|
| Trusses |
 |
|---|
| |
|
| Product Size |
65mm - 100mm (2.5" - 4") |
|---|
| Material Range |
0.55mm - 1.2mm (26-18 gauge) |
|---|
| Production Rate |
300 - 700m/hour (990-2300 feet/hour) |
|---|
| Control |
Touch Screen with Windows XP |
|---|
| Printer |
Dual Head Inkjet |
|---|
| Punch Tools |
Nine - Standard |
|---|
| Length |
3410mm (11'2") |
|---|
| Width |
730mm (2'5") |
|---|
| Height |
1472mm (4'10") |
|---|
| Weight |
2100kg (4630lb) |
|---|
| Electrical Req. |
400 - 460V 50 - 60Hz |
|---|
| Motor Power |
4.0kW (10hp) |
|---|
| Hydraulic Power |
4.0kW (5.5hp) |
|---|
| Hydraulic Tank |
40 litres (10.5 gal) |
|---|
| Covers |
Fully Guarded with Emergency Stop Buttons |
|---|
|
| |
|
The H520 Frame Machine produces framing from steel coil up to 1.2mm thick.
The combination of specific punch tools gives this multi-purpose machine the ability to produce Studs, Tracks and Trusses directly from software instructions without any machine adjustments.
All Hardware is CE and UL compliant and tested to comply with current CE emissions standards.
|
Standard Tool Operations
Web Notch - Punches away the web to allow through intersections
|
Service Hole - Up to Ø38mm wiring or plumbing hole.
|
Lip Notch - Punches away the lip to allow T or through intersections
|
Dimple - Punched hole for screw and recess for screw head
|
Swage - Crimps the product undersize to allow through intersections
|
Crimp Cut Off - Cuts the product to length and crimps the end to allow a load bearing connection
|
End Chamfer - Notches the end for angled bracing
|
Plumbing Service Hole - Large punched hole for waste pipes
|
| |
Web Holes - For Extra Fixing
|
|
Inkjet Printed Component Information
|
ExtraTools.
Option 1- Customer defined prepunch tool
Option 2 - Customer defined postpunch tool
The H520 is a larger Howick Frame Machine so it has space for two extra hydraulic tools, commonly these are specified for extra fixing hole punches such as bolt down holes or for floor structure attachment positions. For machines that require more than two extra tools, or larger tools are required, "Howick" will design and manufacture a specialised machine to suit.
End Bearing.
This machine is unique with the ability to produce True-Load Bearing Studs from the use of a special cut-off tool that crimps the end of the studs to locate into the bottom of the track section. Customers using this machine are able to build and engineer multi-storey buildings of up to 10 floors as the fastenings do not carry the compression loads.
|
Machines 
