FRAMA™ 7600

Multi-Purpose System: Frames, Trusses, Panels, Floor Joists (75 to 200mm / 3" to 8" Sections)

  • Gauge Range
  • Divider
  • Production Speed
  • Divider
  • Dimensions L x W x H
  • Divider

For ultimate flexibility, the Howick FRAMA™ 7600 is a convertible profile frame and truss system. With our unique end-bearing stud detail for true load-bearing frames, plus our swage and dimple details for smooth intersections, this machine is convertible to up to 5 different framing sizes for a range of construction needs.

With the FRAMA™ 7600 in your armoury, you are equipped to produce a single profile size and add additional tooling for alternative profile options as needed, without the cost and complication of a multiple profile roll former.

Our convertible design overcomes many of the traditional compromises that go with making multiple sections with adjustable tooling. It is compact too, which reduces wastage and improves accuracy. As well as the potential to add tooling for additional widths, if your production requirements increase you can simply add another base unit and use your existing tooling for multiple line runs. It offers a gauge range of 0.95 to 1.55 (20 to 16 gauge), and a production speed of up to 800m/2624ft per hour.

 

The FRAMA 7600 includes Howick's unique end-bearing stud detail for true load-bearing frames and Howick's swage and dimple details for smooth intersections. The FRAMA 7600 machine is convertible up to 5 framing sizes. 

With the unique design of the FRAMA 7600 machine you can produce a single profile size and add additional tooling sets for remaining profile options as/or when needed, without the cost and complication of a multiple profile rollformer.

Howick's convertible machine design overcomes many of the compromises that go with making multiple sections with adjustable tooling. The compact design of FRAMA 7600 means less material wastage when changing section width, and higher product accuracy. Convertible design ethos means you can add tooling for additional widths as required. If your production requirements increase, you can buy another base unit and use your existing tooling to run multiple lines at once.

The machine operation is taken from Howick's proven reliable design concepts to minimize down time and maximize production.

 

FRAMA™ 7600
Dimensions L X W X H 4.95m x 0.90m x 1.40m 16' 3" x 2' 10.5" x 4' 7" 
Weight 5500kg 12125lb 
Drive Motor Power 7.5kW 10hp
Hydraulic Power 5.5kW 7.4hp
Hydraulic Tank 60L 15.85gal
Hydraulic Cooler  Optional
Forming Stages 13
Line Speed 24m/min 80'/min 
Production Speed 400 - 800m/hr.* 1312 - 2624'/hr.*
Touch Screen Panel PC (Windows 10)
Machine Control FRAMA Machine Control
Machine Input Files CSV
Tooling Standard Tools
  Truss End Tool, Service Hole, Web Hole, Bolt Hole, Lip Notch, Web Notch, Dimple, Swage, End Bearing Cut-off
Component Marking Dual Head Inkjet Printer

 

Decoiler
   3.0T Decoiler 6600lb Decoiler
Dimensions L X W X H 1.35m x 1.0m x 1.45m 4.5' x 3.3' x 4.9' 
Weight 700kg 1550lb
Drive Motor 4.0kW 5.4hp
Jaws 3 Jaw Self Centring
Jaw Expansion Hydraulic
Jaw Expansion Range 480mm - 520mm 1' 7'' - 1' 8 1/2'' 
Speed Control Dancer Arm with Inclinometer
  Auto Pause at Coil End
Max Coil Weight 3000kg 6600lb
Mac Coil Width 400mm 1' 3 3/4''
Mac Coil OD 1500mm 4' 11''
Nominal Bore 508mm 1'8''
Saftely CE, UL, Cat 3 Compliant
Guarding Fully Guarded Chains & Electrical Controls 
Howick Ltd Reserve the right to update the machine specification without notice
*Production Speed will vary due to component complexity.

 

STANDARD METRIC SIZES

Web Size

75mm  89mm 100mm 150mm 200mm
Flange Height 45mm 45mm 45mm 45mm 45mm
Lip Width 10mm 10mm 10mm 12.7mm 12.7mm
Nominal Coil Width 171mm 185mm 196mm 251mm 301mm
Web Hole Triple 3.5mm Triple 3.5mm Triple 3.5mm Triple 3.5mm Triple 3.5mm
Service Hole 34.1mm 34.1mm 34.1mm 34.1mm 34.1mm
Bolt Hole 3.5mm 3.5mm 3.5mm 3.5mm 3.5mm
Dimple Hole Size 3.5mm 3.5mm 3.5mm 3.5mm 3.5mm
End Truss Miter Tool 45° Cut Std 45° Cut Std 45° Cut Std 45° Cut Std 45° Cut Std

STANDARD IMPERIAL SIZES

Web Size

3''  3.5'' 4'' 6'' 8''
Flange Height 1 5/8' 1 5/8'' 1 5/8'' 1 5/8'' 1 5/8''
Lip Size 3/8'' 1/2'' 1/2'' 5/8'' 5/8''
Nominal Coil Width 0.56' 0.61' 0.64' 0.82' 0.99'
Web Hole 1/2'' 1/2'' 1/2'' 1/2'' 1/2''
Service Hole Triple 1/8" Triple 1/8" Triple 1/8" Triple 1/8" Triple 1/8"
Bolt Hole 1 11/32'' 1 11/32'' 1 11/32'' 1 11/32'' 1 11/32''
Dimple Hole Size 1/8" 1/8" 1/8" 1/8" 1/8"
End Truss Miter Tool 45° Cut Std 45° Cut Std 45° Cut Std 45° Cut Std 45° Cut Std

Get a Quote chevron_right